Tuesday, February 22, 2011

The Hammer

The hammer took form when I decided to rotate the briar I was working with. Most of the briar blocks are rectangles with a corner cut off at a 45 degree angle. This results in most pipes are longer than they are tall (right now I am not including the stem in the dimensions). The hammer is the opposite, it is taller than it is long.

I did a four step stain using black, red, black and then rubbing down the excess with denatured alcohol to tone down the black.




Monday, February 21, 2011

The Mistake Pipe

I was very excited about making this pipe. I liked the idea of bringing the lines off the Diamond saddle stem all the way up to the top of the bowl. I liked the idea of the rim being square with the uneven corners. Unfortunately  I did not anticipate correctly the sweep of the front curves, and so as I was sanding along you might imagine my horror as I discover a hole in the front right curve. The horror increased as I discovered that this was a result of a failure in my own geometry. To fix this problem I carved a small piece of briar to fit against the hole from the inside of the bowl and used epoxy to fix it in place. The front left curve didn't break through but it is very thin. As a result I decide to start breaking the pipe in before finishing the sanding, or the finish.

When the pipe didn't just crack when I finally worked it up to a full bowl, I decided to finish it. I have become rather attached to it and enjoy telling people that it is my mistake pipe.



The black spot is where the bowl cut through the side.

Tuesday, February 15, 2011

The Wizard (or the Whale)

After I made the pipe featured in "The Big Block" I got a lot of positive feed back on it, especially because of the natural burl on the top. This pipe is an attempt to create a similar surface with a wire brush on a less expensive piece of briar. While I was carving this I thought it looked like a cartoon whale that was blowing water our of the hole meant for blowing water out of(I do apologize to all of you lovers of whale anatomy out there. I'm sure I learned the correct word for this at one point but some how it just hasn't  come up much since and thus I have forgotten it), but then a friend of mine thought it looked like a wizard's pipe, and I had to agree. I know that it looks nothing like the pipes from "The Lord of the Rings" movies but I don't think Gandalf would turn this pipe down if it were packed with a nice "Southfarthing"

Once again this is a Briar Pipe. The wire brushed surfaces have been stained with a black stain and the rest is stained with a red mahogany under coat and a brown mocha on top. It has a slightly curved freestyle stem.



Monday, February 14, 2011

The Big Block

My last order of briar came with a rather large block of Plateaux briar. This briar is taken from the edge of the root bowl. When looking at this pipe, the lip around the bowl and the lip where the stem is inserted is the natural contour of the root system. All I did to shape it was to brush any of the flaking bark off of it. I then stained that area black. The rest of the body has some of the most amazing straight grain I have ever worked with. That area is stained with a brown undertone and a red top stain. 




Friday, February 11, 2011

Simplicity



This pipe is another briar. It is a fairly simple design but the continuos curves and the taper make it rather elegant. The rim of the bowl is a step stain with black underlaying a Red Mahogany stain, and the rest of the body is stained with just Red Mahogany. It also has a vulcanite stem and is finished with carnauba wax.

This is one of my favorite shapes that I have tried so far.

Thursday, February 10, 2011

The Crest

At this point I decided to make a go at this pipe making bussiness and finally worked up a crest that I like.  The K and P are for Kemble Pipes. The noose is the tool that was used to kill St. John Kemble. The pipe is the pipe he enjoyed with those men who had come to kill him. Simple but I like it.

Wednesday, February 9, 2011

Sherlock Holmes

Just as I was finishing the first two pipes I discovered that a friend of mine from the St. John Vianney Seminary was cast to play the character of Sherlock Holmes in the spring seminary production of Sherlock Holmes. When I heard that, I jumped for the chance to make a pipe for him. Sherlock Holmes is probably the best known pipe smoker in the world (although the hobbits also have their place quite near to him, probably coming in second, third, fourth, and fifth). I remember as a kid pretending to be Sherlock Holmes. I was much more concerned with wandering around with the cheap plastic bubble pipe clinched between my teeth than with becoming more intelligent, or solving mysteries or anything like that. I don't even think I had read any of the Sherlock Holmes stories at that point.

This pipe is modeled off of a meerschaum bowl in a gourd. It has been made from briar. The stem is vulcanite. This pipe was my first try at a two step stain. First I used a black stain, sanded it down a little and than put a brown stain over that. It is amazing the different colors you can get by layering the stains. The lip around the bowl I did not stain at all. The pipe has a buffed carnauba wax finish